ISO INTERNATIONAL STANDARD 6363-5 Third edition 2022-07 Wrought aluminium and aluminium alloys Cold-drawn rods/bars, tubes and wires - Part 5: Tolerances on form and dimensions for drawn square and hexagonal bars and wires Aluminium et alliages d'aluminium corroyés - Barres, tubes et fils étirés a froid - Partie 5: Tolerances sur forme et dimensions pour barres carrees et hexagonales et fils étirés Reference number IS0 6363-5:2022(E) ISO @ISO2022 IS0 6363-5:2022(E) COPYRIGHT PROTECTED DOCUMENT @ISO2022 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, withoutpriorwrittenpermission.Permission can berequestedfrom eitherIso at theaddress below orIso'smemberbodyinthecountryoftherequester. ISO copyright office CP 401 · Ch. de Blandonnet 8 CH-1214 Vernier, Geneva Phone: +4122 749 0111 Email: copyright@iso.org Website: www.iso.org Published in Switzerland ii @ IS0 2022 - All rights reserved