论文标题
毛细管诱导的凝胶的微观结构和屈服
Microstructure and yielding of capillary force induced gel
论文作者
论文摘要
我们研究了由非棕色颗粒和两个不混溶液体的混合物形成的凝胶的流变和结构。在添加少量湿润液体的少量含量后,液体中颗粒的悬浮液会经历凝胶化,该液体在导致样品跨越网络的颗粒之间形成液体桥。该凝胶的流变学主要在低剪切速率下表现出屈服应力,然后在高剪切速率下剪切应力的线性变化。从流量曲线中提取的明显屈服应力随着饱和度前第二液体的体积分数而迅速增加,而随着颗粒浓度的增加,它表现出单调的增加。使用合适的移位因子对屈服应力曲线进行重新缩放导致屈服应力的经验表达,表明平方依赖液体分数,并且随着粒子分数高于一定值的迅速增加,均以高度非线性的方式组合。使用三维X射线断层扫描技术捕获次级液体含量和颗粒分数随变化的微结构变化。观察到微观结构显示出随着液体含量增加而增加的局部紧凑性,并增加了空间均匀性,而粒子分数增加。分析了来自X射线断层扫描的图像,以获得系统中粒子粒子键(协调数)的分布,这些分布以定性方式解释观察到的屈服应力行为。
We have investigated the rheology and structure of a gel formed from a mixture of non-Brownian particles and two immiscible liquids. The suspension of particles in a liquid undergoes gelation upon the addition of a small content of second, wetting liquid which forms liquid bridges between particles leading to a sample spanning network. The rheology of this gel primarily exhibits a yield stress at low shear rates followed by a linear variation of shear stress at high shear rates. The apparent yield stress extracted from the flow curves increases rapidly with volume fraction of second liquid before saturation, while it exhibits a monotonic increase with increasing particle concentration. Rescaling of the yield stress curves using suitable shift factors results in an empirical expression for the yield stress showing squared dependence on liquid fraction and a rapid increase with particle fraction above a certain value, both combined in a highly nonlinear manner. The microstructural variations with changing secondary liquid content and particle fractions are captured using three dimensional X-ray tomography technique. The microstructure is observed to show increased local compactness with increased liquid content and increased spatial homogeneity with increased particle fractions. The images from X-ray tomography are analysed to obtain the distributions of particle-particle bonds (coordination number) in the system which serve to explain the observed yield stress behavior in a qualitative manner.