论文标题
HCP alpha-Ti中Ti3AL降水的机理
Mechanisms of Ti3Al precipitation in hcp alpha-Ti
论文作者
论文摘要
Ti $ _3 $ al \ Textalpha {} $ _ 2 $的成核和生长,使用透射电子显微镜,原子探针探针和小角度X射线散射的透射电子显微镜,原子显微镜,原子显微镜,原子显微镜,原子显微镜探针组合来表征\ textalpha {} - ti-ti- al-- x合金。基于Ti-7al〜(wt。\%)和包含O,V和MO的模型合金在\ si {550} {\ celsius}时陈化了最高\ si {120} {\ Day}的时间,并且在中间点观察到所得的沉淀分散。沉淀物长到\ si {30} {\ nano \ meter},其体积分数为6--10 \%,具体取决于第三级溶质。发现间隙O增加了\ textalpha {} $ _ 2 $的平衡体积分数,而V和Mo的影响相对较小。在这项研究中添加了任何溶质,但最突出的mo被发现会增加成核密度并降低沉淀的大小和可能的变形速率。 LifShitz-Slyozov-Wagner模型可以描述更粗化,这表明基质扩散控制的粗化机理(而不是通过界面相干性控制)。发现解决方案温度会影响成核数密度,其激活能量为$ e _ {\ mathrm {f}} = 1.5 \ pm {} 0.4 $ 〜ev,支持空位浓度影响\ textalpha {} $ _ 2 $ nucleation的假说。所有溶质增加成核数量密度的观察也与空位控制的成核机制一致。
Nucleation and growth of Ti$_3$Al \textalpha{}$_2$ ordered domains in \textalpha{}-Ti--Al--X alloys were characterised using a combination of transmission electron microscopy, atom probe tomography and small angle X-ray scattering. Model alloys based on Ti--7Al~(wt.\%) and containing O, V and Mo were aged at \SI{550}{\celsius} for times up to \SI{120}{\day} and the resulting precipitate dispersions were observed at intermediate points. Precipitates grew to around \SI{30}{\nano\metre} in size, with a volume fraction of 6--10\% depending on tertiary solutes. Interstitial O was found to increase the equilibrium volume fraction of \textalpha{}$_2$, while V and Mo showed relatively little influence. Addition of any of the solutes in this study, but most prominently Mo, was found to increase nucleation density and decrease precipitate size and possibly coarsening rate. Coarsening can be described by the Lifshitz-Slyozov-Wagner model, suggesting a matrix diffusion-controlled coarsening mechanism (rather than control by interfacial coherency). Solutionising temperature was found to affect nucleation number density with an activation energy of $E_{\mathrm{f}} = 1.5\pm{}0.4$~eV, supporting the hypothesis that vacancy concentration affects \textalpha{}$_2$ nucleation. The observation that all solutes increase nucleation number density is also consistent with a vacancy-controlled nucleation mechanism.