论文标题
通过明显的自旋轨道扭矩和竞争性旋转电流的TA/pt/co/pt中的热电效应检测无现场磁化的切换
Detection of field-free magnetization switching through thermoelectric effect in Ta/Pt/Co/Pt with significant spin-orbit torque and competing spin currents
论文作者
论文摘要
将足够的横向电流应用于重金属(HM)可以通过自旋轨道扭矩(SOT)切换相邻铁磁层(FM)的垂直磁化方向。 HM的选择及其排列对于SOT引起的磁性异质结构中的磁化切换起着重要作用。在这里,在不对称的PT/CO/PT异质结构中,抗阻尼(AD)SOT占了上风。在此堆栈中加上TA(TA/PT/CO/PT)产生了几种引人注目的效果。竞争的自旋电流(由于相邻TA和PT层的相对自旋 - 孔角),明显的AD-SOT,热电效应(尤其是异常的Nernst效应(ANE))以及增强的垂直磁各向异性。对于此TA/PT/CO/PT堆栈,AD-SOT值稳定在PT/CO/PT堆栈中,这比具有竞争旋转电流的堆栈预期的意义很重要。在均匀生长的ta/pt/co/pt堆栈中,没有电流诱导的无场磁化切换。据观察,厚度梯度对于帮助这些异质结构中的无现场磁化切换至关重要。此外,使用热电效应来开发一种技术来检测无现场磁化的开关。该技术将第二个谐波信号视为阅读机制。使用ANE对称性与所施加的电流,可以在单个电流扫描中检测到开关,该电流被证实为常规的DC Hall方法。
Application of sufficient lateral current to a heavy metal (HM) can switch the perpendicular magnetization orientation of adjacent ferromagnetic layer (FM) through spin-orbit torques (SOTs). The choice of the HM and its arrangement plays a major role for the SOT induced magnetization switching in magnetic heterostructures. Here, in asymmetric Pt/Co/Pt heterostructures, anti-damping (AD) SOT prevails. Ta addition to this stack (Ta/Pt/Co/Pt) give rise to several compelling effects viz. competing spin currents (due to opposite spin-Hall angles of adjacent Ta and Pt layers), significant AD-SOT, thermoelectric effects (particularly, anomalous Nernst effect (ANE)), and enhanced perpendicular magnetic anisotropy. For this Ta/Pt/Co/Pt stack, the AD-SOT values are stabilized to that of the Pt/Co/Pt stack, which is significant than what is expected for a stack with competing spin currents. Current-induced field-free magnetization switching was absent in uniformly grown Ta/Pt/Co/Pt stack. It was observed that a thickness gradient is essential to assist the field-free magnetization switching in these heterostructures. Further, the thermoelectric effects are utilized to develop a technique to detect the field-free magnetization switching. This technique detects the second harmonic ANE signal as a reading mechanism. Using ANE symmetry with the applied current, the switching can be detected in a single current sweep which was corroborated to the conventional DC Hall method.