GE.21 -02966(E) Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these United Nat ions Regulations * (Revision 3, including the amendments which entered into force on 14 September 2017) _________ Addendum 1 54 – UN Regulation No. 1 55 Date of entry into force as an annex to the 1958 Agreement: 22 January 2021 Uniform provisions concerning the approval of vehicles with regards to cyber security and cyber security management system This document is meant purely as documentation tool. Th e authentic and legal binding text is: ECE/TRANS/WP.29/20 20/79 (as amended by ECE/TRANS/WP.29/20 20/94 and ECE/TRANS/WP.29/2020/9 7). _________ UNITED NATIONS * Former titles of the Agreement: Agreement concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958 (or iginal version); Agreement concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on t he Basis of these Prescriptions, done at Geneva on 5 October 1995 (Revision 2). E/ECE/TRANS/505/Rev.3/Add.1 54 4 March 2021 E/ECE/TRANS/505/Rev.3/Add.1 54 3 UN Regulation No. 15 5 Uniform provisions concerning the approval of vehicles with regards to cyber security and cyber security management system Contents Page 1. Scope ................................ ................................ ................................ ................................ ......... 4 2. Definitions ................................ ................................ ................................ ................................ ........ 4 3. Application for approval ................................ ................................ ................................ .................. 5 4. Markings ................................ ................................ ................................ ................................ ......... 5 5. Approval ................................ ................................ ................................ ................................ ......... 6 6. Certificate of Compliance for Cyber Security Management System ................................ ............... 8 7. Specifications ................................ ................................ ................................ ................................ ... 9 8. Modification and extension of the vehicle type ................................ ................................ ............... 12 9. Conformity of production ................................ ................................ ................................ ................ 12 10. Penalties for non -conformity of production ................................ ................................ ..................... 12 11. Production definitively discontinued ................................ ................................ ................................ 12 12. Names and addresses of Technical Services responsible for conductin g approval test, and of Type Approval Authorities ................................ ................................ ................................ .......... 13 Annexes 1 Information document ................................ ................................ ................................ ...................... 14 2 Communication ................................ ................................ ................................ ............................. 16 3 Arrangement of approval mark .......