EN IS0 19085-9 EUROPEANSTANDARD NORMEEUROPEENNE EUROPAISCHE NORM October 2024 ICS13.110;79.120.10 Supersedes ENIS019085-9:2020 English Version Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (IS0 19085. 9:2024) Machines a bois - Sécurite - Partie 9: Scies circulaires a Holzbearbeitungsmaschinen - Sicherheit - Teil 9: table de menuisier (avec et sans table mobile) (IsO Tischkreissagemaschinen (mit und ohne Schiebetisch) 19085-9:2024) (IS0 19085-9:2024) This European Standard was approved by CEN on 20 July 2024. CENmembers arebound to comply with the CEN/CENELEC Internal Regulations which stipulate theconditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references member. This European Standard exists in three official versions (English, French, German).A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkiye and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHESKOMITEEFURNORMUNG CEN-CENELECManagement Centre:RuedelaScience23,B-1040Brussels @2024CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 19085-9:2024 E worldwidefor CEN national Members. EN IS0 19085-9:2024 (E) Contents Page Europeanforeword.. Annex ZA (informative)Relationship betweenthis European Standard and the essential requirements .of Directive .2o06/.42/EC aimedto be covered.... 2 ENIS0 19085-9:2024 (E) European foreword tools"in collaboration with Technical Committee CEN/TC 142"Woodworking machines-Safety"the secretariatof whichisheldbyUNl. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2025, and conflicting national standards shall be withdrawn at the latest by April 2025. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. ThisdocumentsupersedesENIS019085-9:2020. This document is intended to be used in conjunction with Part 1 of the series. This document has been prepared under a standardization request addressed to CEN by the European Commission.The StandingCommitteeof theEFTAStates subsequently approves theserequestsforits Member States. For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this document. Any feedback and questions on this document should be directed to the users' national standards body/national committee.Acompletelisting of thesebodies can befound on the CEN website. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:Austria,Belgium,Bulgaria, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkiye and the United Kingdom. Endorsementnotice The text of IS019085-9:2024 has been approved byCEN as ENIS019085-9:2024 without any modification. 3