ISOIASTM INTERNATIONAL STANDARD 52701 First edition 2013-11-15 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing Guide standard pour la caracterisation de la performance des dosimetresetdessystemesdedosimetriepourutilizationdans le traitementdes radiations Referencenumber ISO/ASTM 52701:2013(E) INTERNATIONAL ISO/ASTMInternational2013 ISO/ASTM 52701:2013(E) PDF disclaimer This PDFfile may contain embedded typefaces.In accordance with Adobe's licensing.policy,this fle may be printed or viewed but Secretariat nor ASTM International accepts any liability in this area. Adobe is a trademark of Adobe Systems Incorporated. and ASTM members. In the unlikely event that a problem relating to it is found, please inform the ISO Centrai Secretariat or ASTM International at the addresses given below. ISO/ASTMInternational2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or country of the requester. In the United States, such requests should be sent to ASTM International. ISO copyright office ASTM International,100 Barr Harbor Drive, PO Box C700, Case postale 56· CH-1211 Geneva 20 West Conshohocken,PA 19428-2959, USA Tel. +41 22 749 01 11 Tel. +610 832 9634 Fax +41 22 749 09 47 Fax +610 832 9635 E-mail [email protected] E-mail [email protected] Web www.iso.org Web www.astm.org Published in Swizerland @ ISO/ASTM International 2013-All rights reserved ISO/ASTM 52701:2013(E) Contents Page 1 2 Referenced documents . 1 3 Terminology........ 2 Significance and use..... 2 5 Dosimeter/dosimetrysystemcharacterization 3 6 Effect of influence quantities 3 Documentation.. 9 8 Repeat of performance characterization. 9 Measurement uncertainty 10 Keywords. Annexes Table 1 Examples of performance characteristics of dosimeters/dosimetry systems Table2 Examples of influence quantities.... 4 Table A1.1 Example of 23 factorial design ... Table A2.1 Influence quantities to be used in the irradiation experiments 8 Table A2.2 Irradiations to 10 kGy.... 9 Table A2.3 Irradiations to 45 kGy... 9 Table A2.4 ANOVA of experimental effects for 10 kGy. 6 Table A2.5 ANOVA of experimental effects for 45 kGy.... 9 ISO/ASTM International 2013 -All rights reserved