ISO INTERNATIONAL STANDARD 10545-6 Second edition 2010-04-01 Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles Carreauxetdallescéramiques- Partie 6: Détermination de la résistance a I'abrasion profonde pour les carreauxnonémailles Reference number ISO 10545-6:2010(E) @ISO2010 ISO 10545-6:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but accepts no liability in this area. Adobe is a trademarkof Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by IsO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHTPROTECTEDDOCUMENT ? ISO2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, ISO's member body in the country of the requester. ISO copyright office Case postale 56. CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 4122 749 0947 E-mail [email protected] Web www.iso.org Published in Switzerland ii @ ISO 2010 - All rights reserved ISO 10545-6:2010(E) Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies (iso member bodies). The work of preparing International Standards is normally carried out through IsO International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2. adoptedbythetechnical committeesarecirculatedtothememberbodiesforvoting.Publicationasan International Standard requires approval by at least 75 % of the member bodies casting a vote. rights. IsO shall not be held responsible for identifying any or all such patent rights. ISO 10545-6 was prepared by Technical Committee ISO/TC 189, Ceramic tile. This second edition cancels and replaces the first edition (IsO 10545-6:1995), of which subclause 4.3 has been technically revised. IsO 10545 consists of the following parts, under the general title Ceramic tiles: Part 1: Sampling and basis for acceptance Part 2: Determination of dimensions and surface quality Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density Part 4: Determination of modulus of rupture and breaking strength Part 5: Determination of impact resistance by measurement of coefficient of restitution Part 6: Determination of resistance to deep abrasion for unglazed tiles 一 Part 7: Determination of resistance to surface abrasion for glazed tiles 一 Part 8: Determination of linear thermal expansion Part 9: Determination of resistance to thermal shock Part 10: Determination of moisture expansion Part 11: Determination of crazing resistance for glazed tiles Part 12: Determination of frost resistance Part13:Determinationof chemical resistance Part 14: Determination of resistance to stains ISO 2010 - All rights reserved ili