BS IS0 19097-2:2018 BSl Standards Publication Accelerated life test method of mixed metal oxide anodes for cathodic protection Part 2: Application in soils and natural waters bsi. BS ISO 19097-2:2018 BRITISH STANDARD National foreword This British Standard is theUK implementation of IS019097-2:2018 The UKparticipation initspreparation was entrustedtoTechnical Committee GEL/603, Cathodic protection. A list of organizations represented on this committee can be obtained on requestto its secretary. This publication does not purport to include all the necessary provisions ofa contract.Users areresponsiblefor its correctapplication. @The British Standards Institution 2018 Published by BSI Standards Limited 2018 ISBN9780580908408 ICS77.060 Compliance with a British Standard cannot confer immunity from legalobligations. This British Standard was published under the authority of the StandardsPolicyand StrategyCommitteeon28February2018 Amendments/corrigendaissuedsincepublication Date Text affected BSIS019097-2:2018 INTERNATIONAL ISO STANDARD 19097-2 First edition 2018-02-15 Accelerated life test method of mixed metal oxide anodes for cathodic protection - Part 2: Application in soils and natural waters Méthode d'essaiaccelérédedurabilité des anodes a oxydes metalliquesmixtespourlaprotectioncathodique Partie 2: Application dans les sols et aux naturelles Reference number IS0 19097-2:2018(E) ISO @ IS0 2018 BSIS019097-2:2018 IS019097-2:2018(E) COPYRIGHTPROTECTEDDOCUMENT ISo 2018, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISo at the address below or ISo's member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8. CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 [email protected] www.iso.org i @ IS0 2018 - All rights reserved BSISO19097-2:2018 IS0 19097-2:2018(E) Contents Page Foreword ..iv Introduction. .. 1 Scope. 2 Normative references 3 Terms and definitions 4 Test method. .2 4.1 Principle. .2 4.2 Test solution .2 4.3 Test apparatus .2 4.4 Test specimens .3 4.5 Test procedure. .3 .5 4.6 Continuity of tests 4.7 Treatmentofspecimensaftertest .5 5 Reportingtestresults ..5 6 Applicationofresults. ..5 AnnexA(informative)Typical apparatusforaccelerated lifetest .6 AnnexB (informative)The service life evaluation of metal oxideanodefor cathodic protection .8 Bibliography .12 @IS0 2018-All rights reserved ili BSIS019097-2:2018 IS019097-2:2018(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (so member bodies).The work of preparing International Standards is normally carried out throughIsOtechnicalcommittees.Eachmemberbodyinterestedinasubjectforwhichatechnical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with Iso, also take part in the work. ISocollaboratescloselywiththe InternationalElectrotechnical Commission(IEC)onall matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISo/IEc Directives, Part 1. In particular the different approval criteria needed for the different types of IsO documents should be noted.This document was drafted in accordance with the editorialrules of theIso/lEC Directives, Part2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this documentmay be the subject of patent rights. IsO shall not be held responsible for identifying any or all such patent rights. Details of anypatentrights identifiedduringthedevelopmentofthedocumentwillbeinthe