国家标准网 - 在线下载

ISO 535 2023 Paper and board — Determination of water absorptiveness — Cobb method.pdf
ISO 5402-1 2022 Leather — Determination of flex resistance — Part 1 Flexometer method.pdf
ISO 5412 2022 Plastics — Industrial compostable plastic shopping bags.pdf
ISO 5424 2022 Plastics — Industrial compostable plastic drinking straws.pdf
ISO 5430 2023 Plastics — Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment — Test methods and requirements.pdf
ISO 5431 2022 Leather — Wet blue goat skins — Specification.pdf
ISO 5432 2022 Leather — Wet blue sheep skins — Specification.pdf
ISO 5433 2022 Leather — Bovine wet blue — Specification.pdf
ISO 5451 2022 Ferrovanadium — Specification and conditions of delivery.pdf
ISO 5467-1 2022 Dentistry — Mobile dental units and dental patient chairs — Part 1 General requirements.pdf
ISO 5467-2 2022 Dentistry — Mobile dental units and dental patient chairs — Part 2 Air, water, suction and wastewater systems.pdf
ISO 5472 2022 Healthcare organization management — Pandemic response (respiratory) — Walk-through screening station.pdf
ISO 5528 2023 Ships and marine technology — Deep-sea hydraulic winch equipment.pdf
ISO 5540 2023 Ships and marine technology — Sea-going vessels — Dual traction stowage winches for oceanographic research.pdf
ISO 5631-1 2022 Paper and board — Determination of colour by diffuse reflectance — Part 1 Indoor daylight conditions (C 2°).pdf
ISO 5631-2 2022 Paper and board — Determination of colour by diffuse reflectance — Part 2 Outdoor daylight conditions (D65 10°).pdf
ISO 5631-3 2022 Paper and board — Determination of colour by diffuse reflectance — Part 3 Indoor illumination conditions (D50 2°).pdf
ISO 5667-1 2023 Water quality — Sampling — Part 1 Guidance on the design of sampling programmes and sampling techniques.pdf
ISO 5667-26 2022 Water quality — Sampling — Part 26 Guidance on sampling for the parameters of the oceanic carbon dioxide system.pdf
ISO 5671 2023 Spices and condiments — Dried chive (Allium schoenoprasum L.), cut and ground — Specification.pdf
ISO 5684 2023 Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products.pdf
ISO 5685 2022 Road vehicles — Testing the abrasion resistance of automotive glazing with the windscreen wiper test.pdf
ISO 5718-1 2023 Harvesting equipment — Requirements for cutting elements — Part 1 Blades used on rotary disc mowers and rotary drum mowers.pdf
ISO 5718-2 2023 Harvesting equipment — Requirements for cutting elements — Part 2 Blades used on large rotary mowers.pdf
ISO 5741 2023 Healthcare organization management — Pandemic response — Temporary medical facility.pdf
ISO 5755 2022 Sintered metal material — Specifications.pdf
ISO 5773 2023 Textiles — Determination of components in flax fibres.pdf
ISO 5774 2023 Plastics hoses — Textile-reinforced types for compressed-air applications —.pdf
ISO 5776 2022 Graphic technology — Symbols for text proof correction.pdf
ISO 5794-1 2022 Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1 Non-rubber tests.pdf
ISO 5832-5 2022 Implants for surgery — Metallic materials — Part 5 Wrought cobalt-chromium-tungsten-nickel.pdf
ISO 5832-6 2022 Implants for surgery — Metallic materials — Part 6 Wrought cobalt-nickel-chromium-molybdenum alloy.pdf
ISO 5842 2022 Powder metallurgy — Hot isostatic pressing — Argon detection using gas chromatography and mass spectrometry techniques.pdf
ISO 5926 2023 Technical requirements and test methods for digital cinema stereoscopic projection.pdf
ISO 5946 2022 Bamboo-based activated carbon — General specifications.pdf
ISO 5984 2022 Animal feeding stuffs — Determination of crude ash.pdf
ISO 603-14 2022 Bonded abrasive products — Dimensions — Part 14 Grinding wheels for deburring and fettling snagging on an angle grinder.pdf
ISO 603-15 2022 Bonded abrasive products — Dimensions — Part 15 Cutting-off wheels on stationary or mobile cutting-off machines.pdf
ISO 603-16 2022 Bonded abrasive products — Dimensions — Part 16 Cutting-off wheels on hand held power tools.pdf
ISO 6055 2023 Industrial trucks — Overhead guards — Specification and testing.pdf
ISO 6076 2023 Adhesives — Installation of floor coverings, wood flooring, levelling compounds and tiles — Specification of trowel notch sizes.pdf
ISO 6101-3 2022 Rubber — Determination of metal content by atomic absorption spectrometry — Part 3 Determination of copper content.pdf
ISO 6101-4 2022 Rubber — Determination of metal content by atomic absorption spectrometry — Part 4 Determination of manganese content.pdf
ISO 6149-1 2022 Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1 Ports with truncated housing for O-ring seal.pdf
ISO 6165 2022 Earth-moving machinery — Basic types — Identification and vocabulary.pdf
ISO 6181 2023 Fertilizers and soil conditioners — Liquid methylene-urea slow release fertilizers — General requirements.pdf
ISO 6183 2022 Fire protection equipment — Carbon dioxide extinguishing systems for use on premises — Design and installation.pdf
ISO 6284 2023 Technical product documentation — Construction documentation — Indicat.pdf
ISO 6338 2023 Method to calculate GHG emissions at LNG plant.pdf
ISO 6346 2022 Freight containers — Coding, identification and marking.pdf
ISO 6362-1 2022 Wrought aluminium and aluminium alloys — Extruded rods bars, tubes and profiles — Part 1 Technical conditions for inspection and delivery.pdf
ISO 6362-2 2022 Wrought aluminium and aluminium alloys — Extruded rods bars, tubes and profiles — Part 2 Mechanical properties.pdf
ISO 6362-3 2022 Wrought aluminium and aluminium alloys — Extruded rods bars, tubes and profiles — Part 3 Tolerances on form and dimensions for extrude.pdf
ISO 6362-4 2022 Wrought aluminium and aluminium alloys — Extruded rods bars, tubes and profiles — Part 4 Tolerances on form and dimensions for profiles.pdf
ISO 6362-5 2022 Wrought aluminium and aluminium alloys — Extruded rods bars, tubes and profiles — Part 5 Tolerances on form and dimensions for round, square and hexagonal bars.pdf
ISO 6362-7 2022 Wrought aluminium and aluminium alloys — Extruded rods bars, tubes and profiles — Part 7 Chemical composition.pdf
ISO 6363-1 2022 Wrought aluminium and aluminium alloys — Cold-drawn rods bars, tubes and wires — Part 1 Technical conditions for inspection and delivery.pdf
ISO 6363-2 2022 Wrought aluminium and aluminium alloys — Cold-drawn rods bars, tubes and wires — Part 2 Mechanical properties.pdf
ISO 6363-3 2022 Wrought aluminium and aluminium alloys — Cold-drawn rods bars, tubes and wires — Part 3 Tolerances on form and dimensions for drawn rods bars and wires.pdf
ISO 6363-4 2022 Wrought aluminium and aluminium alloys — Cold-drawn rods bars, tubes and wires — Part 4 Tolerances on form and dimensions for drawn rectangular bars and wires.pdf
ISO 6363-5 2022 Wrought aluminium and aluminium alloys — Cold-drawn rods bars, tubes and wires — Part 5 Tolerances on form and dimensions for draw.pdf
ISO 6363-6 2022 Wrought aluminium and aluminium alloys — Cold-drawn rods bars, tubes and wires — Part 6 Tolerances on form and dimensions for drawn round tubes.pdf
ISO 6369 2023 Ice makers for commercial use — Classification, requirements and test condi.pdf
ISO 6401 2022 Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer using gas-chromatographic method.pdf
ISO 6460-3 2007 Amd 2 2022 Motorcycles — Measurement method for gaseous exhaust emi.pdf
ISO 6469-1 2019 Amd 1 2022 Electrically propelled road vehicles — Safety specifications — P.pdf
ISO 6469-2 2022 Electrically propelled road vehicles — Safety specifications — Part 2 Vehicle operational safety.pdf
ISO 6534 2023 Forestry machinery — Portable chain-saw hand-guards — Mechanical stren.pdf
ISO 6612 2023 Windows and doors — Resistance to wind load — Test method.pdf
ISO 6613 2023 Windows and doors — Air permeability — Test method.pdf
ISO 6627 2022 Internal combustion engines — Piston rings — Expander rail oil-control rings.pdf
ISO 6707-3 2022 Buildings and civil engineering works — Vocabulary — Part 3 Sustainability.pdf
ISO 6709 2022 Standard representation of geographic point location by coordinates.pdf
ISO 6769 2022 Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale.pdf
ISO 6826 2022 Reciprocating internal combustion engines — Fire protection.pdf
ISO 683-3 2022 Heat-treatable steels, alloy steels and free-cutting steels — Part 3 Case-hardening steels.pdf
ISO 6834 2022 Plain bearings — Thermo-hydrodynamic lubrication design charts for circular cylindrical bearings under steady-state conditions.pdf
ISO 6942 2022 Protective clothing — Protection against heat and fire — Method of test Evaluation of materials and material assemblies when exposed to a source of radi.pdf
ISO 7097-2 2022 Nuclear fuel technology — Determination of uranium in solutions, uranium hexafluoride and solids — Part 2 Iron(II) reduction.pdf
ISO 7124 2023 Eggs and egg products — Determination of fipronil and metabolites residues — Liquid chromatography tandem mass spectrometry method.pdf
ISO 7141 2022 Road vehicles — Light alloy wheels — Lateral impact test.pdf
ISO 7176-14 2022 Wheelchairs — Part 14 Power and control systems for electrically powered wheelchairs and scooters — Requirements and test methods.pdf
ISO 7176-19 2022 Wheelchairs — Part 19 Wheelchairs for use as seats in motor vehicles.pdf
ISO 7176-25 2022 Wheelchairs — Part 25 Lead-acid batteries and chargers for powered wheelchairs — Requirements and test methods.pdf
ISO 7176-31 2023 Wheelchairs — Part 31 Lithium-ion battery systems and chargers for powered wheelchairs — Requirements and test methods.pdf
ISO 7176-32 2022 Wheelchairs — Part 32 Test method for wheelchair castor assembly durability.pdf
ISO 7206-13 2016 Amd 1 2022 Implants for surgery — Partial and total hip joint prostheses.pdf
ISO 7217 2023 Titanium and titanium alloys — Bar, rod and billet — Technical delivery cond.pdf
ISO 7229 2022 Rubber- or plastics-coated fabrics — Measurement of gas permeability.pdf
ISO 724 2023 ISO general purpose metric screw threads — Basic dimensions.pdf
ISO 7240-12 2022 Fire detection and alarm systems — Part 12 Line type smoke detectors using a transmitted optical beam.pdf
ISO 7240-31 2022 Fire detection and alarm systems — Part 31 Resettable line-type heat detectors.pdf
ISO 7278-2 2022 Petroleum measurement systems — Part 2Pipe prover design, calibration an.pdf
ISO 7380-1 2022 Fasteners — Button head screws with reduced loadability — Part 1 Hexagon socket button head screws.pdf
ISO 7380-2 2022 Fasteners — Button head screws with reduced loadability — Part 2 Hexagon socket button head screws with collar.pdf
ISO 7439 2023 Copper-bearing contraceptive intrauterine devices — Requirements.pdf
ISO 7494-2 2022 Dentistry — Stationary dental units and dental patient chairs — Part 2 Air, water, suction and wastewater systems.pdf
ISO 7496-2 2022 Ships and marine technology — Vocabulary on inland navigation vessels — Part 2 Ship’s shaftings.pdf
ISO 7507-2 2022 Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2 Optical-reference-line method or electro-optical distance-ranging method.pdf
ISO 7547 2022 Ships and marine technology — Air-conditioning and ventilation of accommodation spaces and other enclosed compartments on board ships — Design conditions and basis of calculations.pdf
ISO 7551 2023 Dentistry — Endodontic absorbent points.pdf
ISO 7622-2 2022 Steel cord conveyor belts — Longitudinal traction test — Part 2 Measurement of tensile strength.pdf
ISO 7623 2022 Steel cord conveyor belts — Cord-to-coating bond test — Initial test and after thermal treatment.pdf
ISO 772 2022 Hydrometry — Vocabulary and symbols.pdf
ISO 7765-2 2022 Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2 Instrumented puncture test.pdf
ISO 7784-3 2022 Paints and varnishes — Determination of resistance to abrasion — Part 3 Method with abrasive-paper covered wheel and linearly reciprocating test specimen.pdf
ISO 7851 2022 Fertilizers, soil conditioners and beneficial substances — Classification.pdf
ISO 7870-2 2023 Control charts — Part 2 Shewhart control charts.pdf
ISO 7905-4 2022 Plain bearings — Bearing fatigue — Part 4 Tests on half-bearings of a metallic multilayer bearing material.pdf
ISO 7906 2022 Leather — Tests for colour fastness — General principles of testing.pdf
ISO 7914 2023 Forestry machinery — Portable chain-saws — Minimum handle clearance.pdf
ISO 7936 2022 Coal — Determination and presentation of float and sink characteristics — General directions for apparatus and procedures.pdf
ISO 7963 2022 Non-destructive testing — Ultrasonic testing — Specification for calibration.pdf
ISO 7967-10 2022 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 10 Ignition systems.pdf
ISO 7967-11 2022 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 11 Liquid fuel systems.pdf
ISO 7967-3 2022 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 3 Valves, camshaft drives and actuating mechanisms.pdf
ISO 7967-6 2022 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 6 Lubricating systems.pdf
ISO 7972 2023 Adhesives — Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding.pdf
ISO 799-3 2022 Ships and marine technology — Pilot ladders — Part 3 Attachments and associated equipment.pdf
ISO 8000-1 2022 Data quality — Part 1 Overview.pdf
ISO 8000-117 2023 Data quality — Part 117 Application of ISO 8000-115 to identifiers in distributed ledgers including blockchains.pdf
ISO 8000-150 2022 Data quality — Part 150 Data quality management Roles and responsibilities.pdf
ISO 8000-2 2022 Data quality — Part 2 Vocabulary.pdf
ISO 8000-51 2023 Data quality — Part 51 Data governance Exchange of data policy statements.pdf
ISO 80000-1 2022 Quantities and units — Part 1 General.pdf
ISO 8100-33 2022 Lifts for the transport of persons and goods — Part 33 T-type guide rails for lift cars and counterweights.pdf
ISO 8102-20 2022 Electrical requirements for lifts, escalators and moving walks — Part 20 Cybersecurity.pdf
ISO 8103-9 2022 Escalators and moving walks — Part 9 Measurement of ride quality.pdf
ISO 81060-3 2022 Non-invasive sphygmomanometers — Part 3 Clinical investigation of continuous automated measurement type.pdf
ISO 8115-1 2022 Cotton bales — Part 1 Dimensions and density.pdf
ISO 8115-3 2022 Cotton bales — Part 3 Packaging and labelling.pdf
ISO 8124-1 2022 Safety of toys — Part 1 Safety aspects related to mechanical and physical properties.pdf
ISO 8124-10 2023 Safety of toys — Part 10 Experimental sets for chemistry and related activities.pdf
ISO 8124-2 2023 Safety of toys — Part 2 Flammability.pdf
ISO 8124-3 2020 Amd 1 2023 Safety of toys — Part 3 Migration of certain elements — Amendment 1 Limits for boron and other elements in slime, and barium in modelling clay.pdf
ISO 8130-16 2022 Coating powders — Part 16 Determination of density by liquid displacement in a measuring cylinder.pdf
ISO 8132 2022 Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series.pdf
ISO 81346-10 2022 Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 10 Power supply systems.pdf
ISO 8157 2022 Fertilizers, soil conditioners and beneficial substances — Vocabulary.pdf
ISO 8178-2 2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2 Measurement of gaseous and particulate exhaust emissions under field conditions.pdf
ISO 8253-3 2022 Acoustics — Audiometric test methods — Part 3 Speech audiometry.pdf
ISO 8325 2023 Dentistry — Test methods for rotary instruments.pdf
ISO 8330 2022 Rubber and plastics hoses and hose assemblies — Vocabulary.pdf
ISO 8443 2022 Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions.pdf
ISO 8504-4 2022 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 4 Acid pickling.pdf
ISO 8518 2022 Workplace air — Determination of particulate lead and lead compounds — Flame and electrothermal atomic absorption spectrometric methods.pdf
ISO 8528-10 2022 Reciprocating internal combustion engine driven alternating current generating sets — Part 10 Measurement of airborne noise.pdf
ISO 8528-12 2022 Reciprocating internal combustion engine driven alternating current generating sets — Part 12 Emergency power supply to safety services.pdf
ISO 8536-15 2022 Infusion equipment for medical use — Part 15 Light-protective infusion sets for single use.pdf
ISO 8536-3 2009 Amd 1 2022 Infusion equipment for medical use — Part 3 Aluminium caps f.pdf
ISO 8562 2022 Cycles — Stem wedge angle.pdf
ISO 8586 2023 Sensory analysis — Selection and training of sensory assessors.pdf
ISO 8601-1 2019 Amd 1 2022 Date and time — Representations for information interchange.pdf
ISO 8639 2023 Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints.pdf
ISO 8655-1 2022 Piston-operated volumetric apparatus — Part 1 Terminology, general requirements and user recommendations.pdf
ISO 8655-2 2022 Piston-operated volumetric apparatus — Part 2 Pipettes.pdf
ISO 8655-3 2022 Piston-operated volumetric apparatus — Part 3 Burettes.pdf
ISO 8655-4 2022 Piston-operated volumetric apparatus — Part 4 Dilutors.pdf
ISO 8655-5 2022 Piston-operated volumetric apparatus — Part 5 Dispensers.pdf
ISO 8655-6 2022 Piston-operated volumetric apparatus — Part 6 Gravimetric reference measurement procedure for the determination of volume.pdf
ISO 8655-7 2022 Piston-operated volumetric apparatus — Part 7 Alternative measurement procedures for the determination of volume.pdf
ISO 8655-8 2022 Piston-operated volumetric apparatus — Part 8 Photometric reference measurement procedure for the determination of volume.pdf
ISO 8655-9 2022 Piston-operated volumetric apparatus — Part 9 Manually operated precision laboratory syringes.pdf
ISO 8676 2022 Fasteners — Hexagon head screws, with fine pitch thread — Product grades A and B.pdf
ISO 871 2022 Plastics — Determination of ignition temperature using a hot-air furnace.pdf
ISO 8765 2022 Fasteners — Hexagon head bolts, with fine pitch thread — Product grades A.pdf
ISO 8784-2 2023 Pulp, paper and board — Microbiological examination — Part 2 Enumeration of bacteria, yeast and mould on surface.pdf
ISO 8784-3 2022 Pulp, paper and board — Microbiological examination — Part 3 Enumeration of yeast and mould based on disintegration.pdf
ISO 8848 2022 Small craft — Remote mechanical steering systems.pdf
ISO 8872 2022 Aluminium caps and aluminium plastic caps for infusion bottles and injection vials — General requirements and.pdf
ISO 8887-2 2023 Technical product documentation — Design for manufacturing, assembling, disassembling and end-of-life processing — Part 2 Vocabulary.pdf
ISO 8965 2022 Logging industry — Technology — Vocabulary.pdf
ISO 898-2 2022 Fasteners — Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2 Nuts with specified property classes.pdf
ISO 8980-3 2022 Ophthalmic optics — Uncut finished spectacle lenses — Part 3 Transmittance specifications and test methods.pdf
ISO 8985 2022 Plastics — Ethylene vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetat.pdf
ISO 9016 2022 Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination.pdf
ISO 9022-23 2023 Optics and photonics — Environmental test methods — Part 23 Low pressure combined with cold, ambient temperature and dry or damp heat.pdf
ISO 9022-3 2022 Optics and photonics — Environmental test methods — Part 3 Mechanical stress.pdf
ISO 9094 2022 Small craft — Fire protection.pdf
ISO 9098-1 2023 Bunk beds and high beds — Safety requirements and tests — Part 1 Safety requirements.pdf
ISO 9098-2 2023 Bunk beds and high beds — Safety requirements and tests — Part 2 Test.pdf
ISO 9177-2 2022 Mechanical pencils for technical drawings — Part 2 Black leads — Classification and dimensions.pdf
ISO 9177-3 2022 Mechanical pencils for technical drawings — Part 3 Black leads — Bending strengths of HB leads.pdf
ISO 9211-4 2022 Optics and photonics — Optical coatings — Part 4 Specific test methods abrasion, adhesion and resistance to water.pdf
ISO 9227 2022 Corrosion tests in artificial atmospheres — Salt spray tests.pdf
ISO 923 2022 Coal — Density separation equipment for coal — Performance evaluation.pdf
ISO 9277 2022 Determination of the specific surface area of solids by gas adsorpt.pdf
ISO 9288 2022 Thermal insulation — Heat transfer by radiation — Vocabulary.pdf
ISO 9300 2022 Measurement of gas flow by means of critical flow nozzles.pdf
ISO 9333 2022 Dentistry — Brazing materials.pdf
ISO 9362 2022 Banking — Banking telecommunication messages — Business identifier code (BIC).pdf
ISO 9455-1 2022 Soft soldering fluxes — Test methods — Part 1 Determination of non-volatile matter, gravimetric method.pdf
ISO 9455-6 2022 Soft soldering fluxes — Test methods — Part 6 Determination and detection of halide (excluding fluoride) content.pdf
ISO 9488 2022 Solar energy — Vocabulary.pdf
ISO 9528 2022 Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 °C 21 000 kPa — Procurement specification.pdf
ISO 9608 2022 V-belts and V-ribbed belts — Uniformity of belts — Test method for determination of centre distance variation.pdf
ISO 9649 2023 Metallic materials — Wire — Reverse torsion test.pdf
ISO 9650-1 2022 Small craft — Inflatable liferafts — Part 1 Type 1 and type 2.pdf
ISO 9713 2022 Neurosurgical implants — Self-closing intracranial aneurysm clips.pdf
ISO 9727-8 2022 Cylindrical cork stoppers — Physical tests — Part 8 Determination of capillarity.pdf