BS IS0 2407:2024 Tracked Changes compares BS IS0 2407:2024 withBSIS02407:1997+A1:2016 BSl Standards Publication Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy bsi. TRACKED CHANGES IMPORTANT-PLEASENOTE This is a tracked changes copy and uses the following colour coding: Text example 1 -indicates added text (in green) Text example 2 -indicatesremovedtext (inred) - indicates added graphic figure or table indicates removed graphicfigure ortable AboutTracked Changes This document is a PDF containing a Tracked Changes version of BS IS0 2407,whichcompares BS IS02407:2024with BS IS02407:1997+A1:2016. The original version of BS IS0 2407:2024, appended at the end of this document, should be considered the version of record for this publication. PLEASENOTE This Track Changes document is designed to allow the user to identify the main changes to the standard since the previous version. It is not the official standard. Users are therefore advised to refer to the official version of record for implementation purposes. To ensure you have the latestversion of record,please visit https://knowledge.bsigroup.com @The British Standards Institution2024 Published by BSI Standards Limited 2024 ISBN9780539332346 Amendments/corrigendaissuedsincepublication Date Text affected BSIS02407:2024—TrackedChanges FerewordNational foreword This British Standard is the UK implementation of IS0 2407:1997+A1:2016Is0 2407:2024. It supersedes BSIS02407:1997+A1:2016,whichiswithdrawn The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IsO text carry the number of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by [)(A] The UKparticipation in its preparation was entrustedbytoTechnical Committee MTE/1, Machine tools, to Subcommittee MTE/1/2, Machine tools - Accuracy. A list of organizations represented on this subeommitteecommitteecan be obtained on request to its seeretarycommittee manager A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Contractualandlegal considerations This publication has been prepared in good faith,however no representation, warranty, assurance or undertaking (express or implied) is or will bemade,and no responsibility orliability is or will be accepted by BsI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. TheBritish Standards Institution20162024 Published byBSIStandards Limited20162024 ISBN978-0580909757 79780539181838 ICS25.080.50 Compliance with a British Standard cannot confer immunity from legalobligations. This British Standard,having been prepared underthedirection ofthe Engineering Seetor Board, was published under the authority of the Standards BeardPolicy and eomes into effeetStrategy Committee on 15 May 199831 August 2024.